Specifications

DSCF8733The HR-100 uses a loud audio transducer to match the noise in a busy kitchen where there’s lots of action. The alarm is silenced by touching the front panel.

The HR-100 needs no interaction during the day. It will start the next alarm time-out as soon as each alarm is silenced.

To start the HR-100 up in the morning, just touch the front panel for three seconds.

The HR-100 will switch itself off at the end of your business day. You can select the number of hours you want it to run after switching it on.

The HR-100 will run on two AA Alkaline cells for two to six months. It will run for an entire year on two Lithium cells. The HR-100 is designed for harsh environments, where there is lots of moisture, heat and water splashing.

The HR-100 has no moving parts, no dials that can break off and no buttons that will wear out. The touch sensor beneath the little hand does everything.

Technical Specifications:

Interface: Proximity Sensor (Touch Panel)
Alarm Type: Audio (in three phases, dual tone in third phase)
Alarm Kill: Yes (Via Touch Panel)
Alarm Interval: 10, 20, 30, 40, 50 or 60 minutes
Wash Timer: 20 seconds (fixed)
Alarm Level: 85dBA to 92 dBA at 10cm (typical @ 2.0kHz to 2.7kHz)
Run Time: 4, 8, 12, 16, 20 or 24 hours
Power: 3VDC from two AA Cells
Size: 85mm X 56mm X 21mm
(3.34” X 2.20” X 0.83”)
Battery Life: 2 to 6 months
Mounting: Double Sided Tape (included)
Rating: IP54 (Splash resistant)
Safety: UL94-V0 (Flame retardant ABS)
Environmental: Fully RoHS Compliant
Temperature: 0 ̊C to 45 ̊C
Humidity: 0% to 95% RH (non-condensing)
Warranty: 1 year (material and manufacturing) from Dec 1, 2014 (was 6 months before).